Gas storage
Heats and stores water in a tank. A familiar, proven option that suits homes replacing an older unit with steady daily use.
A gas system gives fast recovery and, with a continuous flow unit, hot water that does not run out. Caboolture Plumbing and Hot Water installs, repairs and services gas storage and continuous flow systems across Caboolture on natural gas and LPG, with the gas connection made by a licensed gas fitter, as Queensland law requires.



Heats and stores water in a tank. A familiar, proven option that suits homes replacing an older unit with steady daily use.
No tank. Water is heated as it flows through the unit, so it does not run out and gas is only used while a tap is on. Wall-mounted and compact.
Roof collectors do the work on bright days and a gas booster takes over when they cannot. Suits a north-facing roof and a long-term owner.
Solar hot waterFor blocks without natural gas, the same storage and continuous flow units run on bottled LPG with the right regulator and jets.
Installing a gas system is more than swapping units. The gas line has to carry the new unit's demand, the flue and clearances have to meet the standard, and the work is pressure tested and certified. A compliance certificate is issued for gas installation work in Queensland, and it is part of the job rather than paperwork you chase later.
Repairs follow the same rules. A thermocouple, a gas valve or an ignition fault is often a quick fix, but it is gas work, and only a licensed gas fitter does it.
Natural gas is available in parts of the newer estates around Morayfield, Narangba, North Lakes and Mango Hill, and much of the older town and the rural blocks rely on LPG bottles. We check which supply you have before recommending a unit, because it changes the model and the regulator.
Kallangur, Dakabin, Petrie and Murrumba Downs are a regular part of our run from the Caboolture office, as are Bribie Island and the Redcliffe peninsula.
You get the price before the old unit comes off the wall, and a certificate of compliance with the finished job.
Tell us the system type, roughly how old it is and what it is doing. Send a photo of the rating plate if you can.
The plumber tests the element, thermostat, valves or burner and looks at the tank and the connections before saying repair or replace.
Repair is priced first. If the unit is not worth repairing, you get the replacement options with their prices before deciding.
The repair or the new unit is installed, tested with water running and explained. The old unit leaves with us on a replacement.
On a continuous flow unit, usually a flow rate above what the unit can heat, a blocked filter or a failing sensor. On a storage tank, the tank is undersized or the burner has failed. Both are diagnosed on site.
If natural gas is available at the street or you are set up for LPG, yes. It involves a gas line to the unit, a flue and certification, so it costs more than a like-for-like swap. We price it against a heat pump so you can compare.
A service every couple of years checks the burner, the gas connections, the relief valve and, on a tank, the anode. It keeps the unit efficient and catches faults before they leave you cold.
Yes. Gas installation and repair must be done by someone holding a Queensland gas work licence, and gas installations are certified on completion.
Call 1300 568 203 or book online. If you smell gas, turn it off at the meter or bottle first and call from outside.