4.8Google rating, 26 reviews
CONTINUOUS FLOW · GAS AND ELECTRIC · SIZING DONE PROPERLY

Instant Hot Water System Caboolture

An instantaneous system heats water as it passes through, so it never runs out and uses energy only while a tap is on. Caboolture Plumbing and Hot Water sizes the unit for your household before installing it, because an undersized unit is the most common instant hot water complaint we see.

QBCCLicensed plumbersLocalKing St, CabooltureBookOnline bookingFlowSized by litres a minute
Sized before it is installedBook online or call

On the tools

Plumber commissioning a new electric storage hot water tank with a heat pump unit installed beside it
New electric tank commissioned, heat pump beside it
Plumber's hand on the relief valve and hose fittings beside a hot water tank
Relief valve and fittings checked before leaving
Two plumbers in navy work shirts and shorts sharing a laugh
The plumbers who turn up

Gas or electric?

Gas continuous flow Whole house

  • Handles several outlets at once
  • Wall-mounted outside, compact and quiet
  • Runs on natural gas or LPG
  • Needs a gas line that can carry its demand

Electric instantaneous Single outlet or small home

  • No gas required and simple to fit
  • Suits a granny flat, an ensuite or an office
  • Needs a heavy electrical supply for a whole house
  • Struggles when two showers run together

Getting the size right

Continuous flow units are rated in litres a minute at a given temperature rise. A unit that is fine for one shower cannot hold temperature when the kitchen tap and a second shower open at the same time. We count the outlets that realistically run together and size the unit for that, which is where most badly performing systems went wrong at installation.

The gas supply matters as much as the unit. A larger continuous flow unit can need a bigger gas line than the storage tank it replaces, and we check that before quoting rather than discovering it on the day.

Repairs that fix the cause

Temperature swings

Hot then cold usually means flow above the unit's capacity, a blocked inlet filter or a failing sensor.

Will not fire

Ignition faults, a gas supply problem or a tripped safety cut-out. Gas faults are licensed work and are handled by a licensed gas fitter.

Low flow

Scale in the heat exchanger or a partly blocked filter. Common on tank water and fixable with a descale.

Error codes

The code narrows the fault. Tell us the code when you call and we bring the likely part.

What an instant hot water install includes

What an instant hot water install includes

The unit is chosen for your outlets and your gas or electrical supply, then installed, certified and explained.

  • Outlet count and flow rate assessed
  • Gas line capacity or electrical supply checked
  • Unit installed, flued where needed and connected by the appropriately licensed person
  • Commissioned, temperature set, certified for gas work and explained

How it works

1

Call or book online

Tell us the system type, roughly how old it is and what it is doing. Send a photo of the rating plate if you can.

2

Check the unit

The plumber tests the element, thermostat, valves or burner and looks at the tank and the connections before saying repair or replace.

3

Options and prices

Repair is priced first. If the unit is not worth repairing, you get the replacement options with their prices before deciding.

4

Fix, test, hand over

The repair or the new unit is installed, tested with water running and explained. The old unit leaves with us on a replacement.

Questions answered

What size instant hot water system do I need?

It depends on how many outlets run at once. A single bathroom home is fine with a small unit; a family with two bathrooms and a kitchen running together needs a larger gas unit. We size it on site.

Is an instant system cheaper to run than a tank?

It avoids the standby loss of keeping a tank hot, so for a household that uses hot water in bursts it usually costs less to run. The saving depends on how much hot water you use.

Why is there a delay before the water gets hot?

The unit heats water only when a tap opens, so the pipe run between the unit and the tap has to clear first. A unit placed close to the main bathroom and kitchen keeps the wait short.

Can you fit one in a unit or townhouse?

Often, yes, and the small wall-mounted size is one of the reasons people choose them. Body corporate rules on external units and the flue position are checked first.

Instant hot water not performing in Caboolture?

Call 1300 568 203 or book online. Tell us the brand, the error code if there is one, and how many bathrooms you have.